1 kg
Art. No: W150222
High Performance Grease is a combination of high temperature resistant lithium complex soap and highly refined mineral oils. Formulated with high viscosity base oils, it has a high load carrying capacity.
Details
500 g - copper
Art. No: W150201
IMPA. CODE: 450891
It is an assembly paste containing fully synthetic lubricant and copper particles. Prevents interlocking of moving parts operating under high temperature and pressure. Resistant to washing with pressurised water.
Details
1 kg
Art. No: W150206
IMPA. CODE: 450526
General purpose bearing grease containing EP additives and lithium soap. Resistant to water washing. Provides long-term lubrication where applied. Minimises corrosion and wear. Ideal for lubrication of systems operating under extreme pressure, heavy and vibrating loads.
Details
1 kg
Art. No: W150217
Significantly reduces friction with its rich MoS2 content. It is successfully used in equipment operating under heavy load and where friction wear causes problems. Ideal for moving parts in industry, automotive and textile industry.
Details
1 kg
Art. No: W150218
In addition to its multi-purpose use, it is also used as assembly paste, lubricant and separating agent at high temperatures. Compared to similar products, the molybdenum disulphide content is much higher.
Details
400 ml
Art. No: W160105
NSF H1 approved lubricant for processes in direct contact with or processing food. Provides safe and effective solution thanks to its special and approved formulation. It extends the service time especially in expensive equipment under the risk of wear due to friction.
Details
1 kg - gray
Art. No: W150219
IMPA. CODE: 450874
It is a heavy metal and silicone free metal additive mounting paste. It provides excellent protection against fresh-salt water, steam, gas, acid, solutions and petrol.
Details
30 l
Art. No: W140609-30
The mineral-based 5-function lubricant protects against corrosion - lubricates, stops unwanted noise, cleans, dissolves rust and repels moisture. Thanks to its special formula and versatility, it can be used in many applications. It is ideal for lubricating hinges and guides, opening rust-locked connections, cleaning electronic devices from water and moisture, etc.
Details
1 kg - off white
Art. No: W150200
IMPA. CODE: 450884
It is an excellent assembly paste enriched with ceramic particles. Water repellent, excellent adhesion to surfaces. It gives excellent results on joints, bearings, chain systems, pressurized devices, etc. exposed to high temperature and pressure.
Details
400 ml
Art. No: W150130
IMPA. CODE: 450825
It is a colourless, PTFE-containing dry film lubricant for metal, rubber, plastic and other materials. Ideal for applications where grease cannot be used due to pollution and aesthetics. Suitable for use in the electrical, plastics, textile and automotive industries
Details
100 ml - transparent
Art. No: W150210-100
Details
25 kg
Art. No: W150212-25
NSF H1 approved fully synthetic silicone oil developed for food industry. It has high thermal resistance and excellent resistance to water and water vapour.
Details
1 kg
Art. No: W150223
It is a special high speed grease with synthetic base oil and barium complex soap. It exhibits a long-lasting performance especially in equipment parts operating under aqueous, variable, impact and vibrating loads.
Details
400 ml
Art. No: W160110
IMPA. CODE: 450821
Mineral-based 5-function spray lubricant protects against corrosion - lubricates, stops unwanted noise, cleans, dissolves rust and repels moisture. Thanks to its special formula and versatility, it can be used in many applications. It is ideal for lubricating hinges and guides, opening rust-locked connections, cleaning electronic devices from water and moisture, etc.
Details
400 ml
Art. No: W160115
IMPA. CODE: 450826
Forms a flexible protection layer against corrosion. Resistant to abrasion and pressure. Resistant against water and moisture. It produces a solution that does not jam and collect dirt in moving mechanisms where greases cause problems. Prevents bimetal corrosion. Especially ideal for gear mechanisms, chains, etc. moving equipment. With its excellent penetration effect, it penetrates into the centre of the chain link and provides homogenous lubrication.
Details
400 ml
Art. No: W160171
Details
400 ml - transparent
Art. No: W160118
Details
500 ml
Art. No: W160119
IMPA. CODE: 450828
Prevents sticking and abrasion, reduces noise caused by friction. It is the ideal lubricant for all equipment in the food industry that wears due to friction and decreases efficiency.
Details
400 ml - copper
Art. No: W160101
IMPA. CODE: 450565
Spray assembly paste containing fully synthetic lubricant and copper particles. Prevents interlocking of moving parts operating under high temperature and pressure. Resistant against water, petrol, oil, grease and gases.
Details
25 kg
Art. No: W150211-25
Silicone grease used for filling and lubrication in the combination of plastic, metal and rubber materials. It is odourless. Delays dirt and moisture, reduces noise.
Details
400 ml - off white
Art. No: W160200
IMPA. CODE: 450847
It is a heavy metal and silicone free spray mounting paste with metal additives. It provides excellent protection against fresh-salt water, steam, gas, acid, solutions and petrol.
Details
400 ml
Art. No: W160124
Thanks to the graphite and special substances it contains, it has high adhesion and strength to withstand the toughest conditions.
Details
400 ml - gray
Art. No: W160100
IMPA. CODE: 450846
It is a heavy metal and silicone free spray mounting paste with metal additives. It provides excellent protection against fresh-salt water, steam, gas, acid, solutions and petrol.
Details
16 kg
Art. No: W150217-16
Significantly reduces friction with its rich MoS2 content. It is successfully used in equipment operating under heavy load and where friction wear causes problems. Ideal for moving parts in industry, automotive and textile industry.
Details
400 ml
Art. No: W150151
It is a special oil formulated to remove nicotine, soot and dirt from surfaces such as rubber, plastic and PVC.
Details
