Acetate based elastic single component liquid sealant. It forms a high and permanent elastic gasket with very good adhesion to the materials used. The seal is resistant to changing weather conditions, UV rays, hot water, oil and grease etc. It is resistant to temperatures between -65°C and 260°C (short term +300°C). Especially suitable for use in engines, gearboxes, components, oil seals, cylinder liners, carburettor cover, water pump, etc. Thesurface on which the silicone sealant is to be used must be clean, free from dust, oil, grease, rust and other substances that reduce adhesion. -Remove the remnants of the old gasket before carrying out the repair work. The applied silicone can be levelled with a spatula. Use plastic or stainless steel tools. After the operation, clean the tools with a paper towel and rinse with a solvent. For uncured silicone, we recommend using a silicone remover. Apply a sufficient amount of liquid sealant to one surface, wait 10 minutes and then join the parts together.
Art. No: W200502
IMPA. CODE: 812841
70 ml - black
It is especially suitable for use in materials such as engines, transmissions, parts, oil seals, cylinder liners, carburetor cover, water pump.
Details
Art. No: W200503
200 ml - transparent
Acetate based elastic single component liquid sealant. It forms a high and permanent elastic gasket with very good adhesion to the materials used.
Details
Art. No: W160270-B
IMPA. CODE: 815279
290 ml - white
One-component, elastic, moisture-curing, ms polymer-based adhesive and sealant. It is applied for bonding various materials and sealing weld joints.
Details
Art. No: W160255
IMPA. CODE: 812843
310 ml - black
Oxime-based, high temperature resistant gluing and sealing is silicone.
Details
Art. No: W160270-S
IMPA. CODE: 815280
290 ml - black
One-component, elastic, moisture-curing, ms polymer-based adhesive and sealant. It is applied for bonding various materials and sealing weld joints.
Details
Art. No: W160259-WH
600 ml - white
It is a one component, high modulus polyurethane based sealing material that cures with air humidity.
Details
Art. No: W160261-BK
300 ml - black
Adhesive, impermeable, single component, is a strong adhesive and filling material based on polyurethane.
Details
Art. No: W200504
200 ml - black
Acetate based elastic single component liquid sealant. It forms a high and permanent elastic gasket with very good adhesion to the materials used.
Details
Art. No: W160250-B
IMPA. CODE: 812605
310 ml - white
It is a general purpose, one component (acetic curing), silicone based sealing and filling material with wide usage area.
Details
Art. No: W160250-S
310 ml - black
It is a general purpose, one component (acetic curing), silicone based sealing and filling material with wide usage area.
Details
Art. No: W160250
IMPA. CODE: 812602
310 ml - transparent
It is a general purpose, one component (acetic curing), silicone based sealing and filling material with wide usage area.
Details
Art. No: W200073-300
300 ml - blue
Hylomar is a technically advanced, permanent plastic polyester-urethane sealant.
Details
Art. No: W200508
70 ml - black
Details
Art. No: W200502-O
IMPA. CODE: 812841
70 ml - black
High temperature and gap filling, oil tolerant, sealing silicone liquid gasket with high oil tolerance for flexible flange connections.
Details
Art. No: W160259-GY
600 ml - gray
It is a one component, high modulus polyurethane based sealing material that cures with air humidity.
Details
Art. No: W200073
IMPA. CODE: 812656
80 ml - blue
Hylomar is a technically advanced, permanent plastic polyester-urethane sealant.
Details
Art. No: W160254
IMPA. CODE: 815283
280 ml - red
It is a one-component, moisture curing, high temperature resistant acetoxy based bonding and sealing silicone. 100% silicone polymer.
Details
Art. No: W200505-O
IMPA. CODE: 812842
200 ml - gray
High temperature and gap filling, oil tolerant, sealing silicone liquid gasket with high oil tolerance for flexible flange connections.
Details
Art. No: W160261-GY
300 ml - gray
Adhesive, impermeable, single component, is a strong adhesive and filling material based on polyurethane.
Details
Art. No: W160259-BK
600 ml - black
It is a one component, high modulus polyurethane based sealing material that cures with air humidity.
Details
Art. No: W200506
200 ml - red
Acetate based elastic single component liquid sealant. It forms a high and permanent elastic gasket with very good adhesion to the materials used.
Details
Art. No: W200504-O
IMPA. CODE: 812842
200 ml - black
High temperature and gap filling, oil tolerant, sealing silicone liquid gasket with high oil tolerance for flexible flange connections.
Details
Art. No: W160266
310 ml - transparent
Modified silane based, one component, moisture curing bonding and sealing material.
Details
Art. No: W200505
200 ml - gray
Acetate based elastic single component liquid sealant. It forms a high and permanent elastic gasket with very good adhesion to the materials used.
Details
Art. No: W160261-WH
300 ml - white
Adhesive, impermeable, single component, is a strong adhesive and filling material based on polyurethane.
Details
