Hylomar is a technically advanced, permanent plastic polyester-urethane sealant. Sealant is suitable for a wide variety of fluids, including all industrial fuels, oils, water and brine, air, turbine and piston engine combustion products, water, water / glycol and methanol blends, petroleum and synthetic ester-based lubricating oils, diesel and kerosene fluids. (Avtur and Avcat) are also resistant to fluorocarbon refrigerants. Hylomar is temperature resistant from -50 ° C to + 250 ° C, it can be used to seal sealing surfaces and threaded parts. Hylomar is suitable for sealing effectively from metal to metal and plastic to plastic. Typical applications; Water and oil pumps, Instrument inspection cover, Roller heads and oil pans, Coating of pre-prepared gaskets, Motor and air-tight seal for external high voltage circuit breakers, Seals motor and inlet manifolds for outdoor area and high voltage circuit breaker against the effects of weather, Timing cover, Connection points to oil pumps, Gear and key body components, Sealing of threads, Hylomar has also been used successfully in the assembly of gas turbines, water-cooled generators and turbo vacuum systems. The product is made of copper, silver, etc., with traces of volatile matter at high temperatures. does not stain on it and therefore suitable for joints and teeth close to switch mechanisms. Hylomar does not chemically bond with metals or other substances. It is suitable for metal to metal applications as well as gasket cladding. Usage: Sealing surfaces should be clean and dry. Apply a thin, even coating on both sides of the product and allow the solvent to evaporate. Then the components can be assembled. Because Hylomar is permanently plastic, it is not necessary to install components immediately after the sealant is applied to the sealing surfaces. Due to the characteristics of Hylomar M, the assembled components may need to be retightened. For the bolt load, tighten the required torque, let the sealant settle for a few minutes, then retighten. Hylomar can be cleaned from disintegrated components by rubbing it with a cloth dipped in acetone. The product does not need to be scraped off.
Art. No: W160259-GY
600 ml - gray
It is a one component, high modulus polyurethane based sealing material that cures with air humidity.
Details
Art. No: W200502
IMPA. CODE: 812841
70 ml - black
It is especially suitable for use in materials such as engines, transmissions, parts, oil seals, cylinder liners, carburetor cover, water pump.
Details
Art. No: W200503
200 ml - transparent
Acetate based elastic single component liquid sealant. It forms a high and permanent elastic gasket with very good adhesion to the materials used.
Details
Art. No: W160270-B
IMPA. CODE: 815279
290 ml - white
One-component, elastic, moisture-curing, ms polymer-based adhesive and sealant. It is applied for bonding various materials and sealing weld joints.
Details
Art. No: W160270-S
IMPA. CODE: 815280
290 ml - black
One-component, elastic, moisture-curing, ms polymer-based adhesive and sealant. It is applied for bonding various materials and sealing weld joints.
Details
Art. No: W200504
200 ml - black
Acetate based elastic single component liquid sealant. It forms a high and permanent elastic gasket with very good adhesion to the materials used.
Details
Art. No: W160250
IMPA. CODE: 812602
310 ml - transparent
It is a general purpose, one component (acetic curing), silicone based sealing and filling material with wide usage area.
Details
Art. No: W160261-BK
300 ml - black
Adhesive, impermeable, single component, is a strong adhesive and filling material based on polyurethane.
Details
Art. No: W160255
IMPA. CODE: 812843
310 ml - black
Oxime-based, high temperature resistant gluing and sealing is silicone.
Details
Art. No: W160250-B
IMPA. CODE: 812605
310 ml - white
It is a general purpose, one component (acetic curing), silicone based sealing and filling material with wide usage area.
Details
Art. No: W160259-WH
600 ml - white
It is a one component, high modulus polyurethane based sealing material that cures with air humidity.
Details
Art. No: W160250-S
310 ml - black
It is a general purpose, one component (acetic curing), silicone based sealing and filling material with wide usage area.
Details
Art. No: W200508
70 ml - black
Details
Art. No: W200073-300
300 ml - blue
Hylomar is a technically advanced, permanent plastic polyester-urethane sealant.
Details
Art. No: W200073
IMPA. CODE: 812656
80 ml - blue
Hylomar is a technically advanced, permanent plastic polyester-urethane sealant.
Details
Art. No: W200502-O
IMPA. CODE: 812841
70 ml - black
High temperature and gap filling, oil tolerant, sealing silicone liquid gasket with high oil tolerance for flexible flange connections.
Details
Art. No: W160261-GY
300 ml - gray
Adhesive, impermeable, single component, is a strong adhesive and filling material based on polyurethane.
Details
Art. No: W200505-O
IMPA. CODE: 812842
200 ml - gray
High temperature and gap filling, oil tolerant, sealing silicone liquid gasket with high oil tolerance for flexible flange connections.
Details
Art. No: W160254
IMPA. CODE: 815283
280 ml - red
It is a one-component, moisture curing, high temperature resistant acetoxy based bonding and sealing silicone. 100% silicone polymer.
Details
Art. No: W160259-BK
600 ml - black
It is a one component, high modulus polyurethane based sealing material that cures with air humidity.
Details
Art. No: W200506
200 ml - red
Acetate based elastic single component liquid sealant. It forms a high and permanent elastic gasket with very good adhesion to the materials used.
Details
Art. No: W200504-O
IMPA. CODE: 812842
200 ml - black
High temperature and gap filling, oil tolerant, sealing silicone liquid gasket with high oil tolerance for flexible flange connections.
Details
Art. No: W160266
310 ml - transparent
Modified silane based, one component, moisture curing bonding and sealing material.
Details
Art. No: W200505
200 ml - gray
Acetate based elastic single component liquid sealant. It forms a high and permanent elastic gasket with very good adhesion to the materials used.
Details
Art. No: W160261-WH
300 ml - white
Adhesive, impermeable, single component, is a strong adhesive and filling material based on polyurethane.
Details
